309S High-Temperature Resistant, High-Pressure Resistant, High-Strength, Ultra-Fine Silicone Mold Ceramic Wax for Jewelry

Material Category

Ceram Wax

Material Description

Ceramic wax is a high-temperature and high-pressure resistant photopolymer material with high hardness and strength. It can be used to withstand continuous heating and pressure at high temperatures for ordinary silicone rubber, serving as a silicone rubber mold prototype and replacing the silver plate. This greatly simplifies the entire jewelry manufacturing process and saves time for mass production.
High hardness and high strength
Significantly enhanced the hardness and strength of the resin material, which is beneficial for the material to function properly in subsequent processes. The mold can be directly made on the resin, and after polishing it becomes smooth, then the mold can be directly produced.
Resistant to high temperature and high pressure
Whether it is a high-temperature adhesive or a medium-low temperature adhesive, this material can remain intact, without cracking, expanding or deforming, even under long-term high-temperature and high-pressure conditions.
Both precise and smooth
Due to the extremely high strength of the material, the detail reproduction in the printing is very high. The addition of fillers not only enhances the material's strength but also enables the light to have a certain scattering ability during the curing process, thereby making the surface smoother.

Viscosity	510Mpa*s
Flexural Strength	32Mpa
Flexural Modulus	2850Mpa
Izod Impact-Notched	170J/m²
Density	1.08-1.10g/cm³
Hardness（Shore D）	85 Shore
Changing Temp	40-90℃

English

中文

309S High-Temperature Resistant, High-Pressure Resistant, High-Strength, Ultra-Fine Silicone Mold Ceramic Wax for Jewelry